Hitched implements and agricultural equipment

This series of disk hinged harrows is intended for performance of the following works: - loosening of the top layer of earth; - alignments of a surface of the field; - destruction of weeds; - seals of seeds and fertilizers; - cutting dernin meadows and pastures before plowing; - prelanding...

Sprayers hinged with a herbicidal bar in a basic complete set of ZUBR NSh GERBI/DS-2" G/DS-2 Hinged sprayers of ZUBR NSh "Gerbi/DS-2" are developed together with RUP "Institute of a Plodokvodstvo of NAM of Belarus" and LLC Selagro for processing by herbicides of...

Sprayer hinged shtangovy Bison of NSh in a basic complete set Farmer This series of tractor sprayers is made for the small and medium-sized agricultural enterprises. The sprayer meets all requirements of the international standards for uniformity of introduction of pesticides, observance of...

The unit combined Soil-row outboard U724 / 1 / U724 / 3- for preplant treatment field at a depth of four to eight centimeters. In one pass such a machine is able to perform several operations: loosening, leveling and compacting the soil. The unit combined wide-continuous works as follows: the first...

The mill hinged U540/U540/3-is used for a loosening and hashing of layers of the earth without reversing. It is also possible to apply to mixing on fields of the earth and mineral fertilizers. Besides, pochvofreza hinged can cut stalks and roots of weeds, than and help to make fast, final...

The mill is intended for continuous processing of the soil. Width of capture, mm 1,2; 1,5; 2 Height, mm 1670+/-15 Working speed, km/h 6-8 Transport speed, km/h 20 VOM drive 540 Speed of a working shaft, rpm 850 Depth of loosening, mm 120

It is intended for plowing of soils with a specific resistance up to 0,9 kg/cm under grain and commercial crops in all soil and climatic zones. The plow is simple on a design, is convenient in operation. Productivity, hectare/hour 0,2 Working speed of the movement to,...

Okuchnik hinged three-case R-475/P-475/1 Okuchnik hinged three-case R-475/P-475/1 - is used for an obrabatyvaniye of already loosened earth. Specialization of such units is formation of beds up to sixty centimeters high, an earthing up of plants which grow up on beds, and also loosening of...

It is intended for processing of 2-row landings of potatoes and other propashny cultures, formation of crests, a dovskhodny boronovaniye with processing of the soil in row-spacings, a boronovaniye on shoots, an earthing up. According to the application of the buyer the cultivator is completed with...

The cultivator of U473/U473/1-is used for processing of the soil. There are several main types of processing of soil by means of a cultivator: cultivation, digging up, a boronovaniye, loosening, and also preparation of the field for sowing work. Cultivators are recommended to be applied to...

It is intended for cutting of furrows, dovskhodovy and primary poslevskhodovy processing of row-spacings with a boronovaniye, top dressing and an earthing up of potatoes, continuous and preseeding processing of the soil. Okuchnik with a harrow or fertilizer adaptation works at all types of the...

It is intended for continuous preseeding and autumn processing of the soil. PRICE: 11 400 000 it is white. rub with the VAT Productivity, hectare/hour 1,2 Working speed of the movement to, km/h 7 Working width of capture, m 1,7 Depth of processing of the soil,...

The harrow two-section hinged disk U363/U363/1-is applied to a loosening of the top layer of earth after plowing. In addition, the disk harrow serves for destruction of soil bark in the spring on fields with winter crops and a boronovaniye of shoots. Also by means of a harrow level a field surface...

It is intended for destruction of weeds with simultaneous loosening of a blanket of the soil, a boronovaniye of landings of potatoes and leveling of crests of beds. Productivity, hectare/hour 3,8 Working speed of the movement to, km/h 9 Working...

Harrow disk hinged BND-2.0. It is aggregated with MTZ-82